Difference between revisions of "RocketLauncher Clean Install"

Latest revision as of 00:30, 11 January 2022

Requirements

RocketLauncher & RocketLauncherUI:

.Net 4.0

RocketLauncher requires some utilities found in this VC++ 2010 pack as well.
If RLUI fails to start, you may need to install the VC++ Redistributable packs as well. They are not cumulative, so start with 2005 and work up from there. Many emulators require these files as well so it may be necessary to install them anyways.

Demonstration Videos

If this is your first time with RocketLauncher and you want to understand more about what this is all about, please set aside some time to watch those videos which go over all of RocketLauncher's features and file and folder structures so you can familiarize yourself with where everything needs to be placed. Currently these videos are still based on HyperLaunch 3, but the structure is still the same.

HyperLaunch 3 - Feature Preview

HyperLaunch 3 - Files and Folders

How to do a Clean Install

Grab the files

Grab the latest RocketLauncher installation package from the RocketLauncher Download section and extract it to the root of your desired drive, eg. C:\RocketLauncher

Now simply run the RocketLauncherUI.exe (found in RocketLauncher\RocketLauncherUI\)

Updating via RocketLauncherUI

The installation package will not always contain the latest files, only the files at the time the package was made.

To get the latest, you simply need to run RocketLauncherUI and if you have 'Check for Updates' enabled and an internet connection, you will be presented with an update notification:

You can also force a check for the latest updates by clicking this icon:

Understanding how the ini system works

All these files are found in your RocketLauncher\Settings\ folder.

RocketLauncher.ini:

This file contains settings not specific to a single system. It would contain keys, paths, settings, etc that you wouldn't change on a per-system basis for whatever reason

Global RocketLauncher.ini:

This file contains the same keys found in the system's RocketLauncher.ini, but will have the default settings that affect every system. If you want to turn on and configure a feature on every system without having to touch all the RocketLauncher inis, this is where you do it.

Global Pause.ini:

This file contains the same keys found in the system's Pause.ini, but will have the default settings that affect every system. If you want to turn on and configure a feature on every system without having to touch all the Pause inis, this is where you do it. See the Pause section for more information.

Global Emulators.ini:

This file is where you want to define most, if not all your emulators. Each section in this ini will have an emulator name which is how the system links to the emulator you want to use. The emulators defined in this ini can be used for any system in your Frontend.

SystemName\RocketLauncher.ini:

This file contains the same keys found in Global RocketLauncher.ini but is specific for the system. Default values for all the keys are use_global. If you change the value, it will only affect this system.

SystemName\Pause.ini:

This file contains the same keys found in Global Pause.ini but is specific for the system. Default values for all the keys are use_global. If you change the value, it will only affect this system. See the Pause section for more information.

SystemName\Emulators.ini:

This file contains your [ROMS] section with the Rom_Path and Default_Emulator keys. It can also contain Emulator sections if you want to define an emulator specific to just this system.

SystemName\Games.ini:

This file is the replacement for the old <exe> attributes and how games can be mapped to use different emulators from the default one defined for this system.

On your first launch of any new system, RocketLauncher will create all the default inis it needs for that system.

Point your Frontend to RocketLauncher

All Frontends have built in scripting support or some sort of ability to control the command line (CLI) sent to an emulator.

No matter what Frontend you use, you will need to direct its CLI to RocketLauncher.exe instead. This will forego all built-in scripting so RocketLauncher handles it instead.

You will now also want to map your Frontend in RocketLauncherUI so you can manage all your systems in RLUI from now on. This can be done on the RocketLauncherUI -> Frontends tab in RLUI.

Here you can setup as many Frontends as you want while using the same RocketLauncher installation, which is one of the great things about RocketLauncher!

RocketLauncher comes with plugins for all the different Frontends it supports, so make sure you choose the right one

You can see a list of all the Frontends and guides on how to setup RocketLauncher in them on the front page of the wiki here.

@@ Line 1: / Line 1: @@
-== Demostration Videos ==
+== Requirements ==
-If this is your first time with Hyperlaunch 3 and you want to understand more about what this is all about, please set aside some time to watch those videos which go over all of HyperLaunch 3's features and file and folder structures so you can familiarize yourself with where everything needs to be placed.
+===RocketLauncher & RocketLauncherUI:===
+*[https://www.microsoft.com/en-us/download/details.aspx?id=17851 .Net 4.0]
+:*RocketLauncher requires some utilities found in this [https://www.microsoft.com/en-us/download/details.aspx?id=26999 VC++ 2010 pack] as well.
+:*If RLUI fails to start, you may need to install the [https://support.microsoft.com/en-us/kb/2977003 VC++ Redistributable packs] as well. They are not cumulative, so start with 2005 and work up from there. Many emulators require these files as well so it may be necessary to install them anyways.
+== Demonstration Videos ==
+If this is your first time with RocketLauncher and you want to understand more about what this is all about, please set aside some time to watch those videos which go over all of RocketLauncher's features and file and folder structures so you can familiarize yourself with where everything needs to be placed. Currently these videos are still based on HyperLaunch 3, but the structure is still the same.
 * [http://www.youtube.com/watch?v=KEZKBcLVQOI HyperLaunch 3 - Feature Preview]
-* [http://www.youtube.com/watch?v=yyvVLKHH09E Hyperlaunch 3 - Files and Folders]
+* [http://www.youtube.com/watch?v=yyvVLKHH09E HyperLaunch 3 - Files and Folders]
 == How to do a Clean Install ==
@@ Line 11: / Line 18: @@
 === Grab the files ===
-Grab the latest HyperSpin installation package from the [http://www.hyperspin-fe.com/forum/downloads.php?do=cat&id=110 HyperSpin Download section] and extract it to the root of your desired drive, eg. C:\Hyperspin
+Grab the latest RocketLauncher installation package from the [https://rlauncher.com/forum/index.php?resources RocketLauncher Download section] and extract it to the root of your desired drive, eg. C:\RocketLauncher
-=== Understanding how the ini system works ===
+Now simply run the RocketLauncherUI.exe (found in RocketLauncher\RocketLauncherUI\)
-All these files are found in your HyperLaunch\Settings\ folder.
+=== Updating via RocketLauncherUI ===
-'''HyperLaunch.ini''':
+The installation package will not always contain the latest files, only the files at the time the package was made.
-This file contains settings not specific to a single system. It would contain keys, paths, settings, etc that you wouldn't change on a per-system basis for whatever reason
-'''Global HyperLaunch.ini''':
+To get the latest, you simply need to run RocketLauncherUI and if you have 'Check for Updates' enabled and an internet connection, you will be presented with an update notification:
-This file contains the same keys found in the system's HyperLaunch.ini, but will have the default settings that affect every system. If you want to turn on and configure a feature on every system without having to touch all the HyperLaunch inis, this is where you do it.
+::[[Image:Rluiupdatesfound.png]]
-'''Global HyperPause.ini''':
+You can also force a check for the latest updates by clicking this icon:
-This file contains the same keys found in the system's HyperPause.ini, but will have the default settings that affect every system. If you want to turn on and configure a feature on every system without having to touch all the HyperPause inis, this is where you do it. See the HyperPause section for more information.
+::[[Image:Rluiupdatebutton.png]]
-'''Global Emulators.ini''':
+== Understanding how the ini system works ==
-This file is where you want to define most, if not all your emulators. Each section in this ini will have an emulator name which is how the system links to the emulator you want to use. The emulators defined in this ini can be used for any system in your Frontend.
-'''SystemName\HyperLaunch.ini''':
+All these files are found in your RocketLauncher\Settings\ folder.
-This file contains the same keys found in Global HyperLaunch.ini but is specific for the system. Default values for all the keys are use_global. If you change the value, it will only affect this system.
-SystemName\HyperPause.ini:
+'''RocketLauncher.ini''':
-This file contains the same keys found in Global HyperPause.ini but is specific for the system. Default values for all the keys are use_global. If you change the value, it will only affect this system. See the HyperPause section for more information.
+*This file contains settings not specific to a single system. It would contain keys, paths, settings, etc that you wouldn't change on a per-system basis for whatever reason
-'''SystemName\Emulators.ini''':
+'''Global RocketLauncher.ini''':
-This file contains your [ROMS] section with the Rom_Path and Default_Emulator keys. It can also contain Emulator sections if you want to define an emulator specific to just this system.
+*This file contains the same keys found in the system's RocketLauncher.ini, but will have the default settings that affect every system. If you want to turn on and configure a feature on every system without having to touch all the RocketLauncher inis, this is where you do it.
-'''SystemName\Games.ini''':
+'''Global Pause.ini''':
-This file is the replacement for the old <exe> attributes and how games can be mapped to use different emulators from the default one defined for this system.
+*This file contains the same keys found in the system's Pause.ini, but will have the default settings that affect every system. If you want to turn on and configure a feature on every system without having to touch all the Pause inis, this is where you do it. See the Pause section for more information.
-On your first launch of any new system, HyperLaunch will create all the default inis it needs for that system.
+'''Global Emulators.ini''':
+*This file is where you want to define most, if not all your emulators. Each section in this ini will have an emulator name which is how the system links to the emulator you want to use. The emulators defined in this ini can be used for any system in your Frontend.
-== How to Update an Install from HyperLaunch 2.x ==
+'''SystemName\RocketLauncher.ini''':
+*This file contains the same keys found in Global RocketLauncher.ini but is specific for the system. Default values for all the keys are use_global. If you change the value, it will only affect this system.
-HyperLaunch 3 is not just an update but rather an upgrade. You will be completely changing everything about HyperLaunch. Follow these steps and you will be on your way getting it installed.
+'''SystemName\Pause.ini:'''
+*This file contains the same keys found in Global Pause.ini but is specific for the system. Default values for all the keys are use_global. If you change the value, it will only affect this system. See the Pause section for more information.
-Remove these files & folders from your HyperSpin root directory and back them up in a safe place until after your upgrade is verified working:
+'''SystemName\Emulators.ini''':
+*This file contains your [ROMS] section with the Rom_Path and Default_Emulator keys. It can also contain Emulator sections if you want to define an emulator specific to just this system.
-Keymapper Profiles\*
+'''SystemName\Games.ini''':
-Modules\
+*This file is the replacement for the old <exe> attributes and how games can be mapped to use different emulators from the default one defined for this system.
-Settings\Global Settings.ini**
-z.dll
-z.exe
-AutoHotkey.dll
-HyperSpin.exe
-HyperLaunch.exe
-HyperLaunch.log
-*This folder does not exist anymore but refer to the keymapper section for the correct placement of your profiles for use with HyperLaunch 3.
-**Only remove this file, not the folder.
-=== Step 1 - HyperSpin.exe ===
-Download the latest version of HyperSpin from [https://www.dropbox.com/sh/eifr2ugxyd4kkq6/AABHDKZZqPUAylI-xi9G758Ta/HyperSpin HERE] and replace your existing HyperSpin.exe.  This is required for HyperLaunch 3 to function.
-=== Step 2 - HyperLaunch & HyperLaunchHQ: Download your favorite Front End companion!!  ===
-Download HyperLaunch and HyperLaunchHQ folders and contents from GIT, fallow the [[Download]] page instructions, also download the HyperLaunch Media from [https://www.dropbox.com/sh/eifr2ugxyd4kkq6/AADJGGKFIu3KlSnZ02YqlUQIa/HyperLaunch/ HERE]. These can be located anywhere on your computer but it is recommended that they get placed in your HyperSpin Folder to make them simple to find when you need them, plus it will also make it easier to configure some parts of HyperLaunch.
-=== Step 3 - Connect HyperLaunch & HyperSpin: Point HyperSpin to HyperLaunch directory ===
-Open your Settings.ini in your Hyperspin\Settings folder. Add the following line to the bottom of the [Main] Section:
-Hyperlaunch_Path=D:\Hyperspin\HyperLaunch\
-[[File:Step 3a - HyperLaunch add to Settings.jpeg]]
-Make sure your Path matches your HyperLaunch path on your computer, the path above is an example.
-While you have the Settings.ini open, you can delete the entire [HyperLaunch] section.
-=== Step 4 - Cleaning up your Hyperspin inis ===
-In each of your %System Name%.ini files in the same folder (eg. MAME.ini), you should delete ALL settings that have to do with HyperLaunch 2. The only settings left in the [exe info] section should be:
-[exe info]
-path=
-rompath=
-userompath=
-exe=
-romextension=
-parameters=
-searchsubfolders=
-pcgame=false
-winstate=hidden
-hyperlaunch=true
-They should all be blanked out to avoid confusion like you see above. It is important hyperLaunch key is true and pcgame is false.
-The following highlighted lines from are an example of ones that should be deleted, but you may have more:
-[[File:Step 4a - Delete HyperLaunch Settings.jpeg]]
-Now your [EXE] section should like something like this:
-[[File:Step 4b - systemname ini exe section.jpeg]]
-=== Step 5 - Old Modules ===
-If you didn't already, delete your Modules folder located in your Hyperspin root Directory.  These modules have been moved to the HyperLaunch folder and have been completely rewritten to accommodate the new features of HyperLaunch so these Modules are no longer required. If you know you set any settings inside your modules, you can keep those for now in case you need to reference those settings to apply to in HyperLaunchHQ later.
-=== Step 6 - System Names with Manufacturer tags ===
-HyperLaunch 3 does not support the loose system name structure. For example, Nintendo shall be named Nintendo Entertainment System. Gamecube shall be called Nintendo GameCube, etc. An easy way to tell if your system is named correctly is if the icon appears next to your system name and your main menu wheel image shows at the bottom in HyperLaunchHQ. You can always check your icon folder to see if the system name is supported.
-Another method is to ensure all your Systems in Hyperspin match exactly to the System Names listed in HyperList on the Hyperspin forums  http://hyperlist.hyperspin-fe.com/.  As an example, the Game Boy should be named “Nintendo Game Boy”, not “Nintendo GameBoy” (note the lack of a space), or “Game Boy”.  This will make your configuration and running of HyperLaunch much smoother and the new modules will work across the board.
-From now on, whenever you create a new System via Main Menu Wizard in HyperHQ, make sure the new name you enter matches HyperList exactly.
-Be sure to check these locations and update them to match the correct system name. Places you need to update are marked as "'''SYSTEMNAME'''":
-* Hyperspin\Databases\'''SYSTEMNAME\SYSTEMNAME.xml'''
-* Hyperspin\Databases\Main Menu\Main Menu.xml (open the file an editor and update the system name in there)
-* Hyperspin\Media\'''SYSTEMNAME\'''
-* Hyperspin\Media\Main Menu\Images\Wheel\'''SYSTEMNAME.png'''
-* Hyperspin\Media\Main Menu\Themes\'''SYSTEMNAME.zip'''
-* Hyperspin\Media\Main Menu\Video\'''SYSTEMNAME.mp4'''
-* Hyperspin\Settings\'''SYSTEMNAME.ini'''
-=== Step 7 - Emulator Folder Names ===
-This step isn’t mandatory, but again, it will make your setup and maintenance of HyperLaunch much smoother in the long run.  It is recommended to keep all your Emulators under the one folder, with sub folders for each revision of an emulator in it’s own folder.
-eg. D:\HyperSpin\Emulators\MAME\MAME 0.148\
-If you want a really simplified install of HyperLaunch, you can go to the Emulators tab in HyperLaunchHQ and look at the Path entries for each emulator you want to use and make your paths match that of the ini file. If you decide to keep your own folder structure for emulators you can, you can follow the HyperLaunchHQ guide to see how to set up your emulator paths to work with HyperSpin.
-[[File:Acf1.jpg]]
-You can see in the picture above that the '''Path''' contains ..\ at the start of the Path. This indicates that the folder is a '''"relative path"''' and in the Hyperspin root directory,
-eg. '''D:\Hyperspin\Emulators\Mednafen\mednafen-0.9.26-wip-win32\medanfen.exe'''
-This method gives HyperLaunch and the emulators great portability.  If you decide to move your HyperSpin setup to another drive, you won’t need to reconfigure HyperLaunch to match the paths of the emulators on the new drive you move it to.
-Now that you have set up the base for your new HyperLaunch install, you can follow the HyperLaunchHQ guide to learn how to configure HyperLaunch with all the new features!
-=== Step 8 - Install the font for HyperPause ===
-HyperPause uses the default font BebasNeue.ttf. You can find this on dropbox or on your folder after you download all the files in HyperLaunch\Media\Fonts
-Right click this file and select Install. You can now see all the text in HyperPause.
-=== Step 9 - Move your <exe> tags in your xmls to Games.ini ===
-HyperLaunch does not use those exe tags, and they need to be transitioned out of your xmls and into HyperLaunch's games.ini files found in your System settings folders. See the [[Alternate Emu Mapping]] page on how to create a games.ini for each of your systems and assign games into it.
-After this is done for each system, Delete all the <exe> tags in the database. You can do this by using find/replace or by just re-downloading the xml again from HyperList as HyperList does not store these tags.
-=== Step 10 - Additional Utilities ===
+On your first launch of any new system, RocketLauncher will create all the default inis it needs for that system.
-HyperLaunchHQ makes use of various programs such as Xpadder, JoyToKey, VJoy, and more. It is highly recommended to create folders for these in Hyperspin\Utilities\ if you have not already done so.
+=== Point your Frontend to RocketLauncher ===
-Recommended: DAEMON Tool Lite, Notepad++, Xpadder, JoyToKey, and VJoy.
+All Frontends have built in scripting support or some sort of ability to control the command line (CLI) sent to an emulator.
+<br>
+<br>
+No matter what Frontend you use, you will need to direct its CLI to RocketLauncher.exe instead. This will forego all built-in scripting so RocketLauncher handles it instead.
+<br>
+<br>
+You will now also want to map your Frontend in RocketLauncherUI so you can manage all your systems in RLUI from now on. This can be done on the '''RocketLauncherUI -> Frontends''' tab in RLUI.
+*Here you can setup as many Frontends as you want while using the same RocketLauncher installation, which is one of the great things about RocketLauncher!
+<br>
+<br>
+RocketLauncher comes with plugins for all the different Frontends it supports, so make sure you choose the right one
+<br>
+<br>
+You can see a list of all the Frontends and guides on how to setup RocketLauncher in them on the front page of the wiki [http://www.rlauncher.com/wiki/index.php?title=Main_Page here].

Difference between revisions of "RocketLauncher Clean Install"

Latest revision as of 00:30, 11 January 2022

Contents

Requirements

RocketLauncher & RocketLauncherUI:

Demonstration Videos

How to do a Clean Install

Grab the files

Updating via RocketLauncherUI

Understanding how the ini system works

Point your Frontend to RocketLauncher

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools